Download free

Free material · Thermal qualification

In thermal qualification, correct temperature does not prove sterilization

Execution guide to ISO 17665. The thermocouple can log 134 °C for the declared time and the load may still not be sterile, because moist heat depends on steam contact with every surface, and residual air blocks that contact.

  • What F₀ means: equivalent time at 121.1 °C with z-value of 10 °C
  • Where sensors go, and why the cold point is inside the pack
  • Execution sheet with F₀ per point and a position sketch
~1 minto complete
Free · Privacy-safe

Download the PDF guide

Free. For metrology, clinical engineering and CSSD involved in qualification.

No spam. We only use your data for this request.

What F₀ meansequivalent time at 121.1 °C with z-value of 10 °C
02Where sensors go, and why the cold point is inside the pack
03Execution sheet with F₀ per point and a position sketch

The technical basis connects what f₀ means: equivalent time at 121.1 °c with z-value of 10 °c with where sensors go, and why the cold point is inside the pack, so the material supports an auditable decision instead of a generic checklist.

Arkmeds technical editorial team · Free material · Thermal qualification

Who uses ArkmedsHospitals, networks and clinical engineering providers in Brazil and LatAm

How it works

  1. Fill in the form

    Essential details, in under a minute.

  2. Get the material

    We send access to your email.

  3. Apply with confidence

    Use it in daily clinical engineering, with support if needed.

Why Arkmeds

Test method

What F₀ means: equivalent time at 121.1 °C with z-value of 10 °C

Acceptance criteria

Where sensors go, and why the cold point is inside the pack

Traceable record

Execution sheet with F₀ per point and a position sketch

Frequently asked questions

What exactly does this material cover?

Execution guide to ISO 17665. The thermocouple can log 134 °C for the declared time and the load may still not be sterile, because moist heat depends on steam contact with every surface, and residual air blocks that contact.

Can I use it as my official procedure?

Use it as field support. Your manufacturer instructions, applicable standards and local approved procedure always prevail.

How do I receive the file?

After submitting, access is released and also sent by email. Check Spam and Promotions if needed.

Ready to download the material?

~1 min · Free · Privacy-safe

Download free