Download free

IEC 62353 · recurrent and post-repair testing

Electrical safety testing: what to measure, which method and against which limit

Execution guide to IEC 62353. Class I and II, applied parts B/BF/CF, the three leakage methods (direct, differential and alternative) with each method’s limit table, and the field traps that pass dangerous equipment.

  • Earth (100/300/500 mΩ), insulation (2/7/70 MΩ) and leakage limits by method
  • When 60601-1 applies and when 62353 applies, and why limits do not swap
  • Execution sheet with method, limit and measured value on each line
~1 minto complete
Free · Privacy-safe

Download the PDF guide

Free. For clinical engineering, biomedical service and medical physics.

No spam. We only use your data for this request.

01Earth (100/300/500 mΩ), insulation (2/7/70 MΩ) and leakage limits by method
02When 60601-1 applies and when 62353 applies, and why limits do not swap
03Execution sheet with method, limit and measured value on each line

The technical basis connects earth (100/300/500 mω), insulation (2/7/70 mω) and leakage limits by method with when 60601-1 applies and when 62353 applies, and why limits do not swap, so the material supports an auditable decision instead of a generic checklist.

Arkmeds technical editorial team · IEC 62353 · recurrent and post-repair testing

Who uses ArkmedsHospitals, networks and clinical engineering providers in Brazil and LatAm

How it works

  1. Fill in the form

    Essential details, in under a minute.

  2. Get the material

    We send access to your email.

  3. Apply with confidence

    Use it in daily clinical engineering, with support if needed.

Why Arkmeds

Test method

Earth (100/300/500 mΩ), insulation (2/7/70 MΩ) and leakage limits by method

Acceptance criteria

When 60601-1 applies and when 62353 applies, and why limits do not swap

Traceable record

Execution sheet with method, limit and measured value on each line

Frequently asked questions

What exactly does this material cover?

Execution guide to IEC 62353. Class I and II, applied parts B/BF/CF, the three leakage methods (direct, differential and alternative) with each method’s limit table, and the field traps that pass dangerous equipment.

Can I use it as my official procedure?

Use it as field support. Your manufacturer instructions, applicable standards and local approved procedure always prevail.

How do I receive the file?

After submitting, access is released and also sent by email. Check Spam and Promotions if needed.

Ready to download the material?

~1 min · Free · Privacy-safe

Download free